Specifications — TP Series Receivers
Video
Number/signal type��������������������� 1 or 2 sets of proprietary analog signals
Connectors ������������������������������������� 1 or 2 shielded RJ-45 female
Video input— refer to the TP Transmitters Family User’s Manual,
part #68-546-02
Video output
Number/signal type
TP R BNC A������������������������ 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source;
or
3 NTSC/PAL composite video from a single source
TP R BNC AV��������������������� 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source;
or
3 NTSC/PAL/SECAM composite video from a single source
and 1 NTSC/PAL/SECAM composite video
TP R 15HD A���������������������� 1 analog RGBHV, RGBS, RGsB, component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM composite video from a single source;
or
3 NTSC/PAL composite video from a single source
Connectors
TP R BNC A������������������������ 5 BNC female
TP R BNC AV��������������������� 6 BNC female
TP R 15HD A���������������������� (1) 15-pin HD female
Nominal level �������������������������������� 1 Vp-p for Y of component video and S-video, and for composite video
0�7 Vp-p for RGB and for R-Y and B-Y of component video
0�3 Vp-p for C of S-video
Minimum/maximum levels�������� 0�3 V to 1�45 Vp-p
Impedance�������������������������������������� 75 ohms
Maximum resolution �������������������� 1600x1200
Refer to the user’s manual for the maximum distances recommended for specific resolutions.
N
Audio
Number/signal type��������������������� 1 or 2 sets of analog proprietary signals
Connectors ������������������������������������� 1 or 2 shielded RJ-45 female
Frequency response ���������������������� 20 Hz to 20 kHz, > 0�05 dB
THD + Noise���������������������������������� 0�03% @ 1 kHz, 0�3% @ 20 kHz at maximum output (unweighted)
S/N�������������������������������������������������� >63 dB at nominal level
Crosstalk����������������������������������������� <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ������������ >80 dB @ 1 kHz
CMRR���������������������������������������������� >33 dB @ 20 Hz to 20 kHz
Audio input— refer to the TP Transmitters Family User’s Manual,
part #68-546-02
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
N
Audio output
Number/signal type
TP R BNC A������������������������ 1 stereo audio balanced/unbalanced, and 1 stereo audio unbalanced
TP R 15HD A���������������������� 1 stereo audio balanced/unbalanced
TP R BNC AV��������������������� 2 stereo audio balanced/unbalanced, and 2 stereo audio unbalanced
Extron TP Series Receivers • Specifications
1
Vibration����������������������������������������� ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety����������������������������������� CE, CUL, UL
EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI
MTBF����������������������������������������������� 30,000 hours
Warranty����������������������������������������� 3 years parts and labor
All nominal levels are at 10%.
Specifications are subject to change without notice.
N
N
7.6-112108-D9
Extron TP Series Receivers • Specifications
3
|
Crate Amplifiers Musical Instrument Amplifier V32H User Manual
Crown Audio Stereo Amplifier IQ PIP USP3 CN User Manual
Danby Dehumidifier DDR50A2GP User Manual
D Link Network Router EBR 2310 User Manual
DMP Electronics Home Security System XR200A User Manual
Dual Cassette Player MXC22 User Manual
Dyson Vacuum Cleaner PN25982 03 02 User Manual
Garland Convection Oven SEM 100D1 User Manual
Garland Range GXHP11 User Manual
GE Monogram Refrigerator 48 Built In Refrigerators User Manual