INTRODUCTION
Thank you for your purchase of
the DB 25b, a passive direct box
designed to take high impedance
signals and convert them to low
impedance. The unit features an
Attenuator volume control for the
input signal, and a Ground Lift
switch which may reduce
DB25b Direct Box
2
1
2
3
1
unwanted hum caused by "ground
loops".
DESCRIPTION
Input Jacks: 1/4" unbalanced
jacks for receiving line or
instrument level signals.
Attenuator: Reduces the input
signal by the amount indicated.
Ground Lift Switch: In the "Lift"
position, the ground connection of
the XLR jack is disconnected from
the chassis.
Output Jack: XLR balanced jack
for connection to a mixing board
or other balanced input device.
SPECIFICATIONS
FOR WARRANTY
INFORMATION, SEE
OUR WEBSITE;
Frequency Response: 20 - 20kHz +/- 3 dB
Output Impedance: 600 Ohms
Input Impedance: 50K Ohms
Max Output Level: +4 dBm
WWW.ROLLS.COM
Rolls Corporation
Salt Lake City, UT
02/08
|
Regency Stove F1100 User Guide
Revox Speaker Resound I inwall 50 User Guide
Rosewill TV Mount RMS MT2790 User Guide
Samsung Clothes Dryer DV410AE User Guide
Samsung Projection Television HL72A650C1F User Guide
Samsung Refrigerator RB2055SL User Guide
Sanyo Air Conditioner CH2432 User Guide
Sanyo Battery Charger CR17335SE User Guide
SATO All in One Printer GL 4xxe User Guide
Sennheiser Headphones HD 448 User Guide